Sport Vibrations SV-Balance 106 Fitness & Yoga SUP
Sport Vibrations SV-Balance 106 Fitness & Yoga SUP
Sport Vibrations® - SV-Wing Surf
Sport Vibrations SV-Balance 106 Fitness & Yoga SUP
Sport Vibrations® - Super Light SUP
All-round & Trekkiing SUPs
Sport Vibrations® Premium Thermo Outdoor Bag
World of Sport Vibrations® products
Sport Vibrations® - SV-Wing Surf
Sport Vibrations® Super-Light Paddel
Sport Vibrations® Premium Thermo Outdoor Bag
Windsurf with SUPs
Sport Vibrations SV-Balance 106 Fitness & Yoga SUP
Sport Vibrations® - High-Quality-Super-Light SUP
Sport Vibrations® Premium Thermo Outdoor Bag
Sport Vibrations SV-Balance 3 Pcs CarbonComp Paddle
Sport Vibrations® Super-Light Paddel
Windsurf with SUP
Kayak Accessories
Sport Vibrations SV-Balance 106 Fitness & Yoga SUP
Trekking SUPs

Retrofit luggage net breakpoint set (Black Edition) with glue and rubber band

How to do

Retrofit luggage net breakpoint set (Black Edition) with glue and rubber band

SKU: 120.000.004-1
GTIN: 4260439561558
HAN: 120.000.004-1
Category: SUP Accessories
Manufacturers:

Retrofit luggage net breakpoint set with adhesive and rubber band

Consisting of:

4 pieces of metal rings on retaining patch - color white, diameter 8.27 cm
1x elastic band (for use as a luggage net)
1x tube of special polymer adhesive

Important: The adhesive must be applied to both surfaces, but in a very thin layer. Technicoll 8002 works on the principle of "cold welding"—meaning the adhesive slightly softens the TPU surface, allowing the materials to bond directly with each other when pressed together. If too much adhesive is applied, a thick layer forms that prevents the two TPU layers from welding together cleanly. A thin, even layer is therefore crucial for achieving maximum strength.

Please do not use solvents for cleaning. Solvents can damage the TPU coating or alter the surface in a way that impairs the effectiveness of the cold-welding bond. Simply cleaning the surface with clear water and a little mild soap, then allowing it to dry completely, is sufficient.

24,99 €

incl. 19% VAT , incl. shipping costs

Old price: 29,99 €

Manufacturers recommended retail price: 29,99 €

(Save 16.67%, i.e. 5,00 €)

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Description
Reviews

The 4 attachment points can be glued on the board in any square shape with the enclosed adhesive. The enclosed rubber band is then connected with all 4 breakpoints, so that a full-fledged luggage net can be installed on the board.

Step by step instructions for sticking on D-rings

Ideal processing temperature of the adhesive +15 ° C to +25 ° C
Please always attach D-rings directly to the outer shell of the board (not to the deck pad)!
Inflate the SUP board to its full volume
Cleaning the places where the D-rings are to be attached.
Clean the D-ring patch.
Place the D-ring on the desired location and outline (mark) the location with a pencil.
If there are several D-rings, care should be taken to ensure that they are aligned together
Apply a thin layer of PVC adhesive to the marked area and spread it carefully
Also apply a thin layer of the adhesive to the bottom of the D-ring (on the D-ring patch)
Allow max. 1 minute (double-sided application) to ventilate
Place the D-ring on the marked spot.
Use a spoon to squeeze out the air bubbles and keep the D-ring pressed for a few minutes
Remove all glue residue
Mask the edges with adhesive tape so that they do not open when drying

After a drying time of 24 hours, the D-rings are resilient and ready for use

Product Information/Technical Data Sheet

Application

Bonding of soft PVC films with each other, as well as with rigid PVC and other materials.

Application Examples

Stand-up paddle boards (SUP), inflatable boats, swimming pool liners, pond liners, and vehicle tarpaulins made of soft PVC. Suitable for new bonding and repair work, PVC pipes.

Processing Instructions/Product Data

Base
Polymer

Viscosity (+23 °C)
Approx. 550 mPas

Solids Content
Approx. 27%

Density
1.0 g/cm³

Color
Colorless, transparent

Wet Bonding Time
Approx. 10 to 30 seconds (single-sided application), max. 1 minute (double-sided application)

Application Method
Single-sided and double-sided

Processing Temperature
+15 °C to +25 °C

Consumption
150 - 250 g/m²

Cleaning
Cured adhesive can only be removed mechanically.

Permissible Storage Time
At least 3 years when stored cool and dry in the sealed original container.

Preferred Storage Temperature
+10 °C to +25 °C

Cold Behavior

Not sensitive to frost. Thickening at lower temperatures. Fully usable after tempering to processing temperature.

Preferred Materials

• Soft PVC (PVC-P) → Wood-based materials
• Rigid PVC (PVC-U) with each other as well as with → Textiles
• Artificial leather → Paper, cardboard
• PUR foam

Not suitable for: PE, PP, PTFE (Teflon®), POM, silicone, EPDM, rigid PS foams (e.g., Styropor®)

Due to the variety of possible materials and differences in adhesion behavior, adhesion tests are necessary before practical use.

Surface Preparation

Bonding surfaces must be clean, particularly free of oil, grease, or release agents.

Processing

The adhesive is applied single-sided (for small areas) or double-sided in a very thin, even, and complete layer using a brush, spatula, or roller. Absorbent, rough surfaces usually require a slightly heavier application or a second application after the first one has dried.

Immediately after applying the adhesive, the substrates are joined with light pressure. Ensure that the bonded materials remain in contact. If necessary, press again until sufficient initial tack is achieved and secure against slipping.

An assessment of final strength and durability can only be made after several days!

Special Property

Minor damage, e.g., in swimming pool liners made of soft PVC, can also be repaired underwater. The appropriate PVC repair patch is coated with the adhesive and immediately pressed onto the damaged area underwater, rubbing until the necessary initial adhesion is achieved.

Air and water temperatures below +15 °C may result in reduced bonding performance!

PDF

Safety Data Sheet

Safety Data Sheet

Product safety information

Manufacturer information:

Sport Vibrations® - Ulla & Wolfgang Svoboda oHG
Industriestrasse 11
Bayern
Kronach, Deutschland, 96317
info@sport-vibrations.com

https://sport-vibrations-shop.com/

Item information	Value
Item weight:	0,10 kg

There are no reviews yet.