Sport Vibrations SV-Balance 106 Fitness & Yoga SUP

Sport Vibrations SV-Balance 3 Pcs CarbonComp Paddle

Sport Vibrations® Premium Thermo Outdoor Bag

Sport Vibrations® - High-Quality-Super-Light SUP

Replacement fin box for Us-Box system including white patch and adhesive for self-assembly

How to do

Replacement fin box for Us-Box system including white patch and adhesive for self-assembly

SKU: 200.000.015
GTIN: 4260439560797
HAN: 200.000.015
Category: SUP Accessories
Manufacturers:

Replacement fin box for US-Box system incl. withe Patch and adhesive for self-assembly

This fin box is suitable as a replacement fin box for sticking on both inflatable (inflatable) SUP's, as well as for hardboard SUP's, or other water companions

Furthermore, this fin box is also ideal for attaching a direction-stabilizing "middle sword fin" to any standard standup paddle board (SUP). This also serves as a "drift inhibitor" if you want to upgrade the SUP to a wind SUP.

Technical (basic) knowledge to remove the old and attach (glue) this replacement fin case is required.

This fin box is suitable for all commercially available US-box plug-in fins

29,95 €

incl. 19% VAT , incl. shipping costs

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Description
Reviews

Set consisting of:

* Fin case (us-box model)
* Border finishing patch (white)
* Glue tube

Step by step instructions for sticking on the fin box

• Remove the remnants of the old fin box extremely carefully with the utmost care so as not to damage the material underneath!
• Ideal processing temperature of the adhesive +15 ° C to +25 ° C
• Cleaning the places where the fin box should be attached.
• Always apply the fin box to a clean, uneven surface
• Place the fin box at the desired location and outline (mark) the location with a pencil.
• If there are several fin boxes, care should be taken to ensure that they are aligned together
• Apply a thin layer of PVC adhesive to the marked area and spread it carefully
• Also apply a thin layer of the adhesive to the underside (adhesive side) of the fin box
• Allow max. 1 minute (double-sided application) to ventilate
• Place the fin box on the marked spot.
• Hold down the fin box for a few minutes with maximum contact pressure
• Remove all glue residue
• Then the same procedure now with the fin box cover (patch)
• The air that may now form air bubbles in the patch should always be pushed out to the edge with a spoon.
• Mask the edges with adhesive tape so that they do not open when drying

After a drying time of 24 hours (if possible let it harden with a little pressure), the fin box is resilient and ready for use